rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums.
The (NEW) MyPaipoBoards Forums have moved to a new site. New registration is required.

Click on the link below:
About the Forums - Read Me!
 
   {MyPaipoBoards Home}MyPaipoBoards Home  FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


pine paipo

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building
View previous topic :: View next topic  
Author Message
nthomas



Joined: 08 Dec 2009
Posts:
Location: California, Ventura

PostPosted: Tue Dec 08, 2009 6:03 pm    Post subject: pine paipo Reply with quote

Hello all,

I am new to shaping wood boards (and new to this forum, really cool place), and found a cheap piece of 3/4 in pine at the local hardware store that was wide enough for a traditional paipo shape. What is recommended for sealing it? I have seen threads about using linseed and turpentine, does anyone have any advice on the amount of coats or method for pine?

Thanks,

Noah
Back to top
View user's profile Send private message
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca

PostPosted: Tue Dec 08, 2009 6:31 pm    Post subject: Reply with quote

I have made lots of wood paipos and I have oiled some but if you want it to last I start with 2 coats of minwax sanding sealer and sand with 320 after each coat of sealer then I use 4 coats of minwax helmman spar varnish sanding with 600 after each coat. you can use semi or gloss what ever you like then use paste wax on the bottom to make it slickery then go surf it that the fun part. MRMIKE Cool
_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
nthomas



Joined: 08 Dec 2009
Posts:
Location: California, Ventura

PostPosted: Wed Dec 09, 2009 11:54 am    Post subject: Reply with quote

Thanks MrMike, the photos of your boards in this forum were part of the inspiration for me to try to make my own. Is there a loss in board flex with the amount of coats you put on?

Noah
Back to top
View user's profile Send private message
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca

PostPosted: Wed Dec 09, 2009 5:38 pm    Post subject: Reply with quote

not at all the varnish is flexable. epoxi and resin are not. I like to see it when you are done MRMIKE Cool
_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
Soulglider



Joined: 04 Feb 2008
Posts:

PostPosted: Wed Dec 09, 2009 7:27 pm    Post subject: x Reply with quote

mike, the new resin research epoxy IS pretty flexible as well as some of the new PU resins. we live in a great time! Wink
_________________
soulglider
http://soulgliderpaipo.blogspot.com
Back to top
View user's profile Send private message
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca

PostPosted: Wed Dec 09, 2009 7:50 pm    Post subject: Reply with quote

I'am flexable
_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
OG-AZN



Joined: 27 Jul 2009
Posts:
Location: Norcal

PostPosted: Thu Dec 10, 2009 12:20 am    Post subject: Reply with quote

Doing a little experimenting w/ epoxy myself. Used some West Marine 105 (supposed to be flexible)originally intended for a boat resto project on my latest ply paipo. So far so good strength & flex wise. A lot quicker & easier than using varnish. You do add a bit more weight to the board using epoxy & the stuff's kinda expensive too.
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


MyPaipoBoards Forums is an online community constructed by paipoboarders for paipoboarders.
The forum is hosted and maintained by rodndtube.com.
Powered by phpBB 2.0.23 © 2001, 2002 phpBB Group :: Spelling by SpellingCow.