rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums.
The (NEW) MyPaipoBoards Forums have moved to a new site. New registration is required.

Click on the link below:
About the Forums - Read Me!
 
   {MyPaipoBoards Home}MyPaipoBoards Home  FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


Help with my paipo design needed

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building
View previous topic :: View next topic  
Author Message
krusher4



Joined: 17 Aug 2011
Posts:

PostPosted: Fri Aug 19, 2011 11:34 am    Post subject: Help with my paipo design needed Reply with quote

Hi, my name is keith and I live in wales UK.
I have been bodyboarding for 18 years now and do understand a certian ammount about surfboard board design.

Recently (since a friend got one and I had a go) I have been thinking of getting a fibreglass paipo, so i need some help with the design.

I have made a template from my fave bodyboard and just extended the rail till it came to a point, and gave it a large swallow tail (rahther than bodyboard cressent)

So Questions.

1 bodyboard have zero rocker at the rear and basically have a bit of nose kick in the front 6" will this work on a stiff fiberglass board?

2 I have been considering fins, but seeing I dont have them on my bodyboards dont think I need big ones, have been looking at either FCS etc twins fin set ups or getting the 4 fin bonzer set up so I have 2 small and 2 large to swap between.

3, where should the fins go on the board? (Its 44" long for scale)

4, A body board is 2" thick how think am I going to need this thing to be?

5, rail design. i'm used it we pretty basic 50/50 bodyboard rail what would you suggest?

I also started this same thread over at swalock's this is what has already been discussed
http://www2.swaylocks.com/comment/reply/1060819?quote=1#comment-form

Thanks keith

Back to top
View user's profile Send private message
rodndtube
Dolphin Glider


Joined: 06 Jan 2004
Posts: 690
Location: USA, MD, Baltimore

PostPosted: Fri Aug 19, 2011 4:10 pm    Post subject: Re: Help with my paipo design needed Reply with quote

krusher4 wrote:
Hi, my name is Keith and I live in wales UK.
I have been bodyboarding for 18 years now and do understand a certain amount about surfboard board design.

Recently (since a friend got one and I had a go) I have been thinking of getting a fibreglass paipo, so i need some help with the design.

I have made a template from my fave bodyboard and just extended the rail till it came to a point, and gave it a large swallow tail (rather than bodyboard crescent)

So Questions.

1 bodyboard have zero rocker at the rear and basically have a bit of nose kick in the front 6" will this work on a stiff fiberglass board?

Yes. Although there are many theories about rocker in board design I find that our very short boards (in contrast to vertical riding) do not require as much rocker for wave entry (nose) and turning (rear rocker) and nose/tail rocker is not much of factor in paddling (drag). Full body rocker would be another thing both for riding the wave (planing) and paddling (drag).

krusher4 wrote:
2 I have been considering fins, but seeing I don't have them on my bodyboards don't think I need big ones, have been looking at either FCS etc twins fin set ups or getting the 4 fin bonzer set up so I have 2 small and 2 large to swap between.

I use small sidebites on my Austin paipo design (see http://mypaipoboards.org/skegs/MySideBites.shtml) along with a smallish center fin (4 to 6 inches, but the last few years mostly a 4" or 4.5"), adjusted forward and aft in a standard Fins Unlimited center fin box.

In my 3-fin set-up, I have found that standard surfboard sidebites are just too large (3.25" is about the smallest they come), particularly on re-entry turns and quick pivots. My roughly 2" sized sidebites appear to be the sweet spot. I favor less toe-in than is customary. There are some pics of my boards on MyPaipoBoards.org (MyBoards).

Although I really like Futures fins boxes the FCS fin boxes with two female slots provide more flexible fin placement adjustments when using an FCS fin with a single center male (rather than the customary double male).

krusher4 wrote:
3, where should the fins go on the board? (Its 44" long for scale)

Tradeoff between large vs. small fins and placement forward or aft from the tail.

krusher4 wrote:
4, A body board is 2" thick how think am I going to need this thing to be?

A bodyboard has a lot more float than a poly/glass board -- maybe more like an EPS/epoxy board. I always feel that my baseline Austin board, 50 x 20.25 x 2.5 inches, has less float than a standard 42" bodyboard. My Austin Checkered RPM has even less float at 50 x 20 x 2.25 inches. The RPM is easier to duck dive and is really nice in reef/point breaks -- the baseline design rides well everywhere but I use it for slower, mushier waves and in cold water East Coast USA surf that is under 6 foot (more float with all that rubber on).

krusher4 wrote:
5, rail design. i'm used it we pretty basic 50/50 bodyboard rail what would you suggest?

I like mine. Look at the Austin boards carefully.

I also started this same thread over at swalock's this is what has already been discussed
http://www2.swaylocks.com/comment/reply/1060819?quote=1#comment-form

Thanks keith

[/quote]
_________________
rodNDtube
"Prone to ride"
I love my papa li`ili`i
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
puurri



Joined: 26 Oct 2009
Posts:
Location: sydney, OZ

PostPosted: Sat Aug 20, 2011 5:40 am    Post subject: Reply with quote

Look at the Paul Gerard? interviews on this site for starters. The greater the control surfaces (fins) the greater the drag. Insert fins follow fashion and greater thought on shape and transition to the hull is required for bellyboard use.

Placement is determined by both hull form and rider. Don't have fins offset (toe in)!!!
Back to top
View user's profile Send private message
krusher4



Joined: 17 Aug 2011
Posts:

PostPosted: Mon Aug 22, 2011 11:30 am    Post subject: Reply with quote

puurri wrote:
L
Placement is determined by both hull form and rider. Don't have fins offset (toe in)!!!


so your saying have both fins pointing straight ahead?
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


MyPaipoBoards Forums is an online community constructed by paipoboarders for paipoboarders.
The forum is hosted and maintained by rodndtube.com.
Powered by phpBB 2.0.23 © 2001, 2002 phpBB Group :: Spelling by SpellingCow.