View previous topic :: View next topic |
Author |
Message |
geoffreylevens
Joined: 18 Nov 2009 Posts:
|
Posted: Mon Feb 14, 2011 10:45 pm Post subject: |
|
|
For sure not used as a sealer on EPS (paint), mostly applied over spackle, or microballons in resin, or something like that. But I was wondering if it would work since resin does seem to bind to it. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
global ernie
![](images/avatars/212954b04c7e2ae6ca.jpg)
Joined: 09 Oct 2008 Posts: Location: northern nsw
|
Posted: Wed Feb 16, 2011 4:16 am Post subject: |
|
|
spoke to my mate, if you want a good bond between any timber and epoxy he recommends you apply a “pisscoat” of thinned epoxy. The purpose is to get some penetration into the timber, to “plasticise” the wood. If appearance is not an issue then cross hatching at 45 deg to the grain with 60 grit sand paper will enhance the bond.
he did not think that other forms of sealing the timber were satisfactory methods for a true bond. also need to correct myself, “starring” is when tiny air bubbles form in the laminate due to some form of chemical reaction occurring between the catalyst and the paint, worse on coloured spray where there is a higher build of paint but still occurs on white boards, just a lot harder to see. “micro cracking” is the term for that decomposition of the resin matrix. West system epoxy web site should have good technical info regarding bonding/thinning etc. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OG-AZN
Joined: 27 Jul 2009 Posts: Location: Norcal
|
Posted: Wed Feb 16, 2011 5:05 am Post subject: |
|
|
For what it's worth, I used 2 coats of West System epoxy on the ply paipo I ride most using an application procedure similar to what Global Ernie describes above. Just the 2 epoxy coats, no glass. The board in question has held up for nearly 2 seasons of fairly hard use. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
geoffreylevens
Joined: 18 Nov 2009 Posts:
|
Posted: Wed Feb 16, 2011 10:41 am Post subject: |
|
|
Quite encouraging. I am glassing because this one has the glue held rocker and concaves warped in so under constant internal stress. I am afraid any even micro injury will cause rapid delammination SPROOOOING!!!! I think I will gamble on the piss coat and pray I have enough resin left to finish the job. That is the big issue as i don't want to chip out $30-40 for another batch and once started ya kind of gotta finish. I have read the epoxy goes pretty well on top of poly resin but not the other way around. So starting w/ epoxy pretty much means finishing with it. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
geoffreylevens
Joined: 18 Nov 2009 Posts:
|
Posted: Fri Feb 18, 2011 6:36 pm Post subject: |
|
|
Just did a cheater coat w/ epoxy on first side. Mixed a mini batch (total mixture 2 oz) and figured I would whip up more if needed. Spread it thin w/ squeegee, not even pre-warmed, and had some left over! Hit it w/ heat gun for a very brief time to make it kick quicker as it was done in a coldish room. I Second side made a 1 1/2 ounce batch and got full coverage with about 1/4 tsp left over.
Moved and did the second side in our "guest room" where it is nice and warm. Wife did sniff test (she is a cross between a blood hound and a canary as far as nose work goes) and zero issues. All hail epoxy. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Soulglider
Joined: 04 Feb 2008 Posts:
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
geoffreylevens
Joined: 18 Nov 2009 Posts:
|
Posted: Sat Feb 19, 2011 11:39 am Post subject: Re: csa |
|
|
Soulglider wrote: | ooooooo, a good woman with a good sniffer! ![Wink](images/smiles/icon_wink.gif) | Uh-huh, uh-huh. Has its up side and its down side. No getting away w/ funky hygiene and that's a fact! ![Laughing](images/smiles/icon_lol.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Soulglider
Joined: 04 Feb 2008 Posts:
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
geoffreylevens
Joined: 18 Nov 2009 Posts:
|
Posted: Sat Feb 19, 2011 11:54 am Post subject: |
|
|
Soulglider wrote: | Wow! Wanna trade? ![Wink](images/smiles/icon_wink.gif) | Nup. She's a keeper for sure!!! Together 22 years, actually street legal married for 20. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|